JP Low Voltage Distribution Board

The JP intelligent integrated distribution board produced by ROOQ integrates reactive power compensation, electric energy measurement, outgoing line protection, load distribution, on-line monitoring and station area management. It has the functions of remote data transmission and intelligent control. It is suitable for the installation and use of low-voltage side of distribution transformer on the pole of urban and rural power grid.

Executive standard

IEC 60439-1 Low voltage switchgear and control-gear assemblies

Part 1:Type test and partial type test assemblies

GB 7251.1 Low voltage switchgear and controlgear assemblies

Part 1: type test and partial type test assemblies

JB/T 9661-1999 Low voltage withdrawable switchgear and other standards

Service Environment

Installation location: Outdoor

Ambient air temperature:

The ambient air temperature shall be less than +45°C, and the average temperature within 24 hours shall be less than+35°C. The min ambient air temperature is -40°C.

The maximum temperature in the container shall be less than +65℃.

Altitude: The altitude of the installation site shall not exceed 2000m

Humidity:

The daily average relative humidity shall be less than 95%; When the maximum temperature is + 25 ℃, the relative humidity can be as high as 100% (including condensation) in a short time

Pollution level: meet the pollution level 4 specified in GB

Technical Data